Note: Code can only be used once per customer. Discount codes are entered after selecting shipping method.
Products
Flakt Woods (252)
Same day deliveries locally & nationwide (UK mainland only). Price on request — Send message with your order, or call 0161 864 1777.
UB107166 Estoc Powerbox 102−710−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
BI101237 Estoc Powerbox 102−710−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 61 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 30kW 61amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from the included ...
63JM.BIF (200)/20/4/6/30 3PH Flakt Woods Bifurcated Fan
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, the ...
63JM.BIF (200)/20/4/6/30 3PH Woods Bifurcated Fan
Another great fan from Woods Air Movement, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet st ...
50JM.BIF (200)/20/2/6/24 3PH Flakt Woods Bifurcated fan
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, the ...
50JM.BIF (200)/20/2/6/24 3PH Woods Bifurcated Fan
Another great fan from Woods, Bifurcated (sometines shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, then hot ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 42.5 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 22.0kW 42.5amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from the inclu ...
63Jm MaxFan high pressure long cased axial extract fan by Flakt Woods
The Flakt Woods JmMax fan axial flow extract fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required ...
50JM.BIF (200)/20/4/6/32 3PH Woods Bifurcated fan
Another great fan from Woods Air Movement , Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet s ...
50JM.BIF (200)/20/4/6/32 3PH Flakt Woods Bifurcated fan
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, the ...
GF805603 Estoc Targe Powerbox 80−560−3 by FlaktWoods
Another great square duct fan from FlaktWoods, constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degr ...
40JM.BIF (200)/20/2/6/32 3PH — Flakt Woods Bifurcated fan
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, the ...
Woods 40JM.BIF (200)/20/2/6/32 3PH
Another great fan from Woods Air Movement, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet st ...
40JM.BIF (200)/20/4/6/32 3PH Flakt Woods Bifurcated fan
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, the ...
40JM.BIF (200)/20/4/6/32 3PH Woods Bifurcated fan
Another great fan from Woods Air Movement, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet st ...
56Jm MaxFan high pressure long cased axial extract fan by Flakt Woods
The Flakt Woods JmMax fan axial flow extract fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required ...
UB806344 Estoc Powerbox 80−630−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
BI101234 Estoc Powerbox 80−630−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 37 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 18.5kW 37amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control fro ...
630mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
45Jm MaxFan high pressure long cased axial extract fan by Flakt Woods
The Flakt Woods JmMax fan axial flow extract fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required ...
50Jm MaxFan high pressure long cased axial fan by Flakt Woods
The Flakt Woods JmMax fan axial flow extract fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required ...
GF805003 Estoc Targe Powerbox 80−500−3 by FlaktWoods
Another great square duct fan from FlaktWoods, constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degr ...
40Jm MaxFan high pressure long cased axial extract fan by Flakt Woods
The Flakt Woods JmMax extract fan axial flow fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required ...
40Jm MaxFan high pressure long cased axial extract fan by Woods
The Flakt Woods JmMax extract fan axial flow fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required ...
BE450023 Estoc Powerbox 67−450−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
UB674544 Estoc Powerbox 67−450−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
30JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB025608
Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...
30JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB025607
Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...
15JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB125603
Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...
30JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB025609
Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...
FWX 6 Inverter speed controller
inverter speed controller
71JM/20/4/6/36/3Ph Long cased axial flow extract fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every, industrial and commercial application The build quality and reliability are the highes ...
71JM/20/4/6/22/3Ph Long cased axial flow extract fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every, industrial and commercial application The build quality and reliability are the highes ...
BE500003 Estoc Powerbox 67−500−1 by Woods
This great square duct fan from Woods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degrees fo ...
UB675514 Estoc Powerbox 67−500−1 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
560mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 31 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 15.0kW 31amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from the include ...
UB805644 Estoc Powerbox 80−560−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
BE560023 Estoc Powerbox 80−560−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
25JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB215607
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finish hig ...
BE500004 Estoc Powerbox 67−500−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
UB675044 Estoc Powerbox 67−500−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
25JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB215608
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finish hig ...
25JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB215609
Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...
500mm Maxfan Compac (high) supplied with Inverter Speed Controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 23 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 11.0kW 23amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from the include ...
63JM/20/4/6/32/3Ph Long cased axial flow extract fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highest ...
63JM/20/4/6/20/3Ph Long cased axial flow extract fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highes ...
500mm Maxfan Compac (Low) supplied with Inverter speed controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
63JM/20/4/6/16/1Ph Long cased axial flow extract fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application. The build quality and reliability are the highest we have ever experience ...
BE450022 Estoc Powerbox 67−450−1 by Woods
This great square duct fan from Woods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degrees fo ...
UB674514 Estoc Powerbox 67−450−1 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
BE400018 Estoc Powerbox 67−400−1 by Woods
This great square duct fan from Woods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degrees fo ...
UB674414 Estoc Powerbox 67−400−1 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
450mm Maxfan Compac supplied with Inverter speed Controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
315mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
400mm Maxfan Compac supplied with Inverter speed controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
355mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
UB674044 Estoc Powerbox 67−400−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
BE400019 Estoc Powerbox 67−400−3 by Woods
This great square duct fan from Woods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degrees fo ...
FWX 5 Inverter speed controller
inverter speed controller
56JM/20/4/6/28/1Ph Long cased axial flow extract fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highes ...
56JM/16/4/5/32/1Ph Long cased axial flow extract fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highes ...
FWX 4 Inverter speed controller
inverter speed controller
50JM/20/4/6/32/1Ph Long cased axial flow extract fan by Flakt Woods
This Fan is now Obsolete it has been replaced with a EJ511466 to make it ERP 2013 compliant (please be aware there may be a performance difference, check if in doubt) ...
50JM/20/4/6/20/1Ph Long cased axial flow extract fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability ar ...
50JM/20/4/6/32/1PH Long Cased Axial Fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highest we have ever experienced with fans still running sinc ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 15.5 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 7.5kW 15.5amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from the includ ...
UB503544 Estoc Powerbox 50−355−3 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
BE355018 Estoc Powerbox 50−355−3 by Woods
This great square duct fan from Woods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degrees fo ...
UB503514 Estoc Powerbox 50−355−1 by FlaktWoods
This great square duct fan from FlaktWoods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degre ...
BE355017 Estoc Powerbox 50−355−1 by Woods
This great square duct fan from Woods is constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degrees fo ...
FWX 3 Inverter speed controller
inverter speed controller
63JMP/20/4/3/24 FlaktWoods Plate Axial was DT635411
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
45JM/16/4/5/40/1Ph Long cased axial flow extract fan by Flakt Woods
This Fan is now Obsolete it has been replaced with a EJ461466 to make it ERP 2013 compliant (please be aware there may be a performance difference, check ...
45JM/16/4/5/30/1PH Long Cased Axial Flow Fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highest we have ever experienced with fans still running sinc ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 12 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 5.5kW 12amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from ...
40JM/16/4/5/40/1Ph Long cased axial flow extract fan by Flakt Woods
This Fan is now Obsolete it has been replaced with a EJ411452 to make it ERP 2013 compliant (please be aware there may be a performance difference, check ...
40Jm/16/4/5/40/1PH Long Cased Axial Flow Fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highest we have ever experienced with fans still running sinc ...
56JMP/20/4/6/24 FlaktWoods Plate Axial was DT565411
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
35JM/16/4/5/22/1Ph Long Cased Axial Flow Fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industria ...
35JM/16/4/5/40/1Ph Long cased axial flow extract fan by Flakt Woods
This Fan is now Obsolete it has been replaced with a EJ361460 to make it ERP 2013 compliant (please be aware there may be a performance difference, check ...
31JM/16/4/5/40/1Ph Long cased axial flow extract fan by Flakt Woods
this fan is now obsolete it has been replaced with a EJ321460 to make it ERP 2013 compliant (please be aware there may be a performance difference, check if in doubt) All spare parts are s ...
31JM/16/4/5/34/1Ph Long Cased Axial Flow Fan by Flakt Woods – EJ321460 replaces the obsolete DX321460
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highest we have ever experienced with fans still running sinc ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 9 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 4.0kW 9amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from the included ...
FWX 2 Inverter speed controller
inverter speed controller
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 7.2 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 3.0kW 7.2amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from the include ...
Flakt Woods VLT Micro Drive — Inverter Speed Controller — 9.6 amps 2.2kW 1ph 230V in 3ph 230V out manufactured by Danfoss
Includes Potentiometer and conversion kitVLT micro Drive 9.6 amps 2.2 kW 1ph 230V in 3ph 230V out Real Space saving side-by-sideA compact book style design allows real side by side mounting without derating.Minimum penetration of dust VLT Micro drive is designed to keep the ...
Danfoss FC 51 Micro Drive 132F 0007 1ph to 3ph Inverter 2.2kW 230V 9.6Amps by Flakt Woods
Includes Potentiometer and conversion kitVLT micro Drive 9.6 amps 2.2 kW 1ph 230V in 3ph 230V out Real Space saving side-by-sideA compact book style design allows real side by side mounting without derating.Minimum penetration of dust VLT Micro drive is designed to keep the ...
FWX 1 Inverter speed controller
inverter speed controller
Flakt Woods CT914098 motor
Flakt Woods Replacement Motor to fit the following fans: EQ511467 — 500mm Max Fan EQ571460 — 560mm Max Fan EQ641406 — 630mm Max Fan EQ571459 — 560mm Max Fan Plus DX571456 — 56JM/16/4/5/32-deg Long Cased Axial Fan DX571459 — 56JM/20/4/6/28-deg Long Cased Axial Fan DX641453 — 63JM/20/4/6/16-deg Long Cased Axi ...
50JMP/20/4/6/32 FlaktWoods Plate Axial was DT505410
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
Flakt Woods CT914068 motor
Flakt Woods Replacement Motor to fit the following fans:JL511460 — 50JM/16/4/5/38-deg Long Cased Axial Fan EJ511466 — 50JM/20/4/6/32-deg Long Cased Axial FanJM511460 — 50JM/16/4/5/38-deg Long Cased Axial FanNH501413 — 2102/500 Plate Mounted FanThe motor is a direct replacement for the below part numbers:HE921213 ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 5.3 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 2.2kW 5.3amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from the include ...
40JMP/16/4/5/32 FlaktWoods Plate Axial was DT405410
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
45JMP/16/4/5/32 FlaktWoods Plate Axial was DT455410
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
35JMP/16/4/5/24 FlaktWoods Plate Axial was DT355410
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
31JMP/16/4/5/32 FlaktWoods Plate Axial was DT315410
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
Flakt Woods CT934115 motor
Flakt Woods Replacement Motor to fit the following fans:DX591458 — 56JM/20/4/6/32-deg Long Cased Axial FanDX661453 — 63JM/20/4/6/20-deg Long Cased Axial FanEM591458 — 56JM/20/4/6/32-deg Short Cased Axial FanEM661453 — 63JM/20/4/6/20-deg Short Cased Axial FanWL242363 — DSC400 Roof unitEQ591458 — 56JM2/20/4/6/30/24- ...
Flakt Woods CT514052 motor
Flakt Woods Replacement Motor to fit the following fans: EQ511466 — 500mm Max Fan PlusDX511464 — 50JM/16/4/5/28-deg Long Cased Axial FanDX511466 — 50JM/20/4/6/32-deg Long Cased Axial FanJL571453 — 56JM/16/4/5/20-deg Long Cased Axial FanJM511453 — 50JM/16/4/5/34-deg Short Cased Axial FanDM511457 — 50JM/20/4/6/32-de ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 3.7 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 1.5kW 3amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from the included ...
Danfoss FC 51 Micro Drive 132F 0005 1ph to 3ph Inverter 1.5kW 230V 6.8Amps by Flakt Woods
Includes Potentiometer and conversion kitVLT Micro Drive 6.8 amps 1.5 kW 1ph 230V in 3ph 230V out Real Space saving side-by-sideA compact book style design allows real side by side mounting without derating.Minimum penetration of dust VLT Micro drive is designed to keep the ...
Flakt Woods VLT Micro Drive — Inverter Speed Controller — 6.8 amps 1.50kW 1ph 230V in 3ph 230V out manufactured by Danfoss
Includes Potentiometer and conversion kitVLT Micro Drive 6.8 amps 1.5 kW 1ph 230V in 3ph 230V out Real Space saving side-by-sideA compact book style design allows real side by side mounting without derating.Minimum penetration of dust VLT Micro drive is designed to keep the ...
Flakt Woods CT524045 motor
Flakt Woods Replacement Motor to fit the following fans:EQ461467 — 450mm Max Fan DX461466 — 45JM/16/4/5/40-deg Long Cased Axial FanDM461453 — 45JM/16/4/5/40-deg Short Cased Axial FanWhat does the code mean CT = motor dia5 = motor length2 = single phase045 = Kw ratingPlease No ...
Flakt Woods BT914030 motor
Replacement motor to suit the following fans: EQ411453 — 400 Max Fan 4pole 1ph EQ411452 — 400 Max Fan 4pole 1ph DX411452 — 40JM/16/4/5/40-deg Long Cased Axial Fan 4 pole 1ph JL461452 — 45JM/16/4/5/30-deg Long Cased Axial Fan 4 pole 1ph DX511455 — 50JM/20/4/6/20-deg Long Cased Axial Fan 4 pole 1ph DM411452 — 40JM/1 ...
Flakt Woods Extractor Fan Inverter Speed Controller IDDXF-54 – 2.2 3ph manufactured by Danfoss
Flaktwoods VLT HVAC Basic Drive FC101 IP54 0.75kW 2.2amps 3ph Designed specifically for three phase fan applications the IDDXF Frequency inverters control speed, torque, and the overall performance of AC & PM motors by controlling the power input. Independent, Switched and Proportional demand control from the includ ...
Flakt Woods BT414013 motor
Flakt Woods Replacement Motor to fit the following fans: DX361460 — 35JM/16/4/5/40 Long Cased Axial Fan JM321401 — 31JM/16/4/5/40 Short Cased Axial Fan JM361452 — 35JM/16/4/5/38 Short Cased Axial Fan DT355410 — 35JMP/16/4/5/34 Plate Mounted Fan NH351413 — 2102/355 Plate fan WD222169 — DSP 355 Roof Mounted Fan ...
Flakt Woods BT514012 motor
Flakt Woods Replacement Motor to fit the following fans: NH311413 — 2102/315mm Plate Mounted Fan DE182163 — DSM 250mm Roof Mounted FanWhat does the code mean BT = motor dia5 = motor length1 = single phase012 = Kw ratingPlease Note If your motor code does not match e ...
Flakt Woods BT514018 motor
Replacement motor to suit the following fans: NG403412 — 2101GP/400 Plate Mounted Fan NH401413 — 2102/400 Plate Mounted FanIt is also a direct replacement for the motors listed below:HE621201HE621213What does the code mean BT = motor dia5 = motor length1 = single phase018 = K ...
Danfoss FC 51 Micro Drive 132F 0003 1ph to 3ph Inverter 0.75kW 230V 4.2Amps by Flakt Woods
VLT Micro Drive 4.2 amps 0.75kW 1ph 230V in 3ph 230V outReal Space saving side-by-sideA compact book style design allows real side by side mounting without derating.Minimum penetration of dust VLT Micro drive is designed to keep the forced ventilation away from the electronics. Printed ...
Flakt Woods VLT Micro Drive — Inverter Speed Controller only — 4.2 amps 0.75kW 1ph 230V in 3ph 230V out manufactured by Danfoss
VLT Micro Drive 4.2 amps 0.75kW 1ph 230V in 3ph 230V outReal Space saving side-by-sideA compact book style design allows real side by side mounting without derating.Minimum penetration of dust VLT Micro drive is designed to keep the forced ventilation away from the electronics. Printed ...
Flakt Woods BT414010 motor
Replacement motor to suit the following fans: DX321460 — 31JM/16/4/5/40-deg Long Cased Axial Fan 4 pole 1ph WZ182152 — B4/250 Axcent 3 box Fan 4pole 1ph DT315410 — 31JMP/16/4/5/40-deg Plate Mounted Fan 4 pole 1ph NG353412 — 2101GP/355 Plate Mounted Fan 4 pole 1ph What does the code mean BT = motor dia ...
CDA 630 x 2D straight through Silencer
630mm dia x 1260mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with ...
TEID13A Transformer Single Phase Fan Speed Controller
The TEID range of Transformer fan speed controllers manufactured by Flakt Woods. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). TEID 1A EA900000 suitable for a maximum full load of 1.0 ampTEID 1.5A ...
CDA 710 x 1D straight through Silencer
710mm dia x 710mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...
630mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
CDA 560 x 2D straight through Silencer
560mm dia x 1120mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car wit ...
2102/500/4/1Ph Plate Mounted Axial Fan by Flakt Woods
THE FAN IS OBSOLETE, WE CAN ONLY SUPPLY SPARES — WE CANNOT SUPPLY THE FAN IF PURCHASEDThe Flakt Woods 2102 range of low cost high quality plate mounted extract fans.Our recommended number one plate mounted fan choice Flakt ...
AS020945-630mm dia JM Impeller
impeller
AS020948-710mm dia JM Impeller
Replacement Impeller
AS020943-630mm dia JM Impeller
Replacement Impeller
AS020942-630mm dia JM Impeller
Replacement Impeller
710mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
ME1.16 Speed Controller by Woods
The Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...
560mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
CDA 630 x 1D straight through Silencer
630mm dia x 630mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...
2102/450/4/1Ph Plate Mounted Extract Fan by Flakt Woods
THE FAN IS OBSOLETE, WE CAN ONLY SUPPLY SPARES — WE CANNOT SUPPLY THE FAN IF PURCHASEDThe Flakt Woods 2102 range of low cost high quality plate mounted extract fans.Our recommended number one plate mounted fan choice Flakt ...
TEID7.5A Transformer Single Phase Fan Speed Controller
The TEID range of Transformer fan speed controllers manufactured by Flakt Woods. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). TEID 1A EA900000 suitable for a maximum full load of 1.0 ampTEID 1.5A ...
AS021040-560mm dia 200mm hub JM Impeller
Replacement Impeller
AS020934-500mm dia 200mm hub JM Impeller
Replacement impeller
CDA 500 x 2D straight through Silencer
500mm dia x 1000mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car wit ...
2102/400/4/1Ph Plate Mounted Extract Fan by Flakt Woods
THE FAN IS OBSOLETE, WE CAN ONLY SUPPLY SPARES — WE CANNOT SUPPLY THE FAN IF PURCHASEDThe Flakt Woods 2102 range of low cost high quality plate mounted extract fans.Our recommended number one plate mounted fan choice Flakt ...
Espada ILC315 Replaces ILC/6P
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Diameters 100 mm to 315 mm in stockVolumes Up to 0.48 m³/s (1,730 m³/h)Pressures Up to 700 Pa (Static)Impeller LB Backward BladeCase Style Impact Resistant PlasticC ...
Ropera ILC315 Replaces ILC/6M DC503110
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Features Diameters: 100 – 315 from stockVolume: up to 0.65 m³/sPressure: up to 920 PaImpeller: backward curved centrifugalCase style: spun steelCase coating: p ...
AS020924-450mm dia JM Impeller
Replacement Impeller
AS020928-560mm dia 160mm hub JM Impeller
Replacement Impeller
AS020926-500mm dia 160mm hub JM Impeller
Replacement Impeller
2102/355/4/1Ph Plate Mounted Extract Fan by Flakt Woods
THE 2102 RANGE OF FANS IS OBSOLETE, WE CAN ONLY SUPPLY SPARES. Replacement Motors can be found by clicking the link BT414013 The Flakt ...
CDA 450 x 2D straight through Silencer
450mm dia x 900mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with ...
AS020917- 315mm dia JM Impeller
Replacement Impeller
AS020921-400mm dia JM Impeller
Replacement Impeller
AS020919-355mm dia JM Impeller
Replacement Impeller
ME1.12 Speed Controller by Flakt Woods
The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...
CDA 560 x 1D straight through Silencer
560mm dia x 560mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...
CDA 400 x 2D straight through Silencer
400mm dia x 800mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with ...
CDA 500 x 1D straight through Silencer
500mm dia x 500mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...
CDA 355 x 2D straight through Silencer
355mm dia x 710mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with ...
CDA 315 x 2D straight through Silencer
315mm dia x 630mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with ...
Flakt Woods ETPR-E‑1 – 500-01 – 0 Fire Damper also known as MFD & ETPR-17
Specified for their superior design and manufacturing excellence, the Flakt Woods CE Certified ETPR-E‑1 fire damper are now available through Northern Fan Supplies from stock With fire safety paramount to residential and commercial building design, contractors and installers rely on the availability of tried and tested CE Certifi ...
Espada ILC200 Replaces ILC/4P DC503103
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Diameters 100 mm to 315 mm in stockVolumes Up to 0.48 m³/s (1,730 m³/h)Pressures Up to 700 Pa (Static)Impeller LB Backward BladeCase Style Impact Resistant PlasticC ...
Ropera ILC200 Replaces ILC/4M DC503108
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Features Diameters: 100 – 315 from stockVolume: up to 0.65 m³/sPressure: up to 920 PaImpeller: backward curved centrifugalCase style: spun steelCase coating: p ...
Ropera ILC250 Replaces ILC/5M DC503109
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Features Diameters: 100 – 315 from stockVolume: up to 0.65 m³/sPressure: up to 920 PaImpeller: backward curved centrifugalCase style: spun steelCase coating: p ...
Espada ILC250 Replaces ILC/5P DC503104
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Diameters 100 mm to 315 mm in stockVolumes Up to 0.48 m³/s (1,730 m³/h)Pressures Up to 700 Pa (Static)Impeller LB Backward BladeCase Style Impact Resistant PlasticC ...
2102/315/4/1Ph Plate Mounted Extract Fan by Flakt Woods
THE 2102 RANGE OF FANS IS OBSOLETE, WE CAN ONLY SUPPLY SPARES.Replacement Motors can be found by clicking the link Flakt Woods BT514012 motorThe Flakt Woods 2102 range of low cost high quality plate mounted fans. ...
CDA 450 x 1D straight through Silencer
450mm dia x 450mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...
Ropera ILC150 Replaces ILC/3M DC503107
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Features Diameters: 100 – 315 from stockVolume: up to 0.65 m³/sPressure: up to 920 PaImpeller: backward curved centrifugalCase style: spun steelCase coating: p ...
Espada ILC150 Replaces ILC/3P DC503102
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Diameters 100 mm to 315 mm in stockVolumes Up to 0.48 m³/s (1,730 m³/h)Pressures Up to 700 Pa (Static)Impeller LB Backward BladeCase Style Impact Resistant PlasticC ...
500mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
TEID5A Transformer Single Phase Fan Speed Controller
The TEID range of Transformer fan speed controllers manufactured by Flakt Woods. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). TEID 1A EA900000 suitable for a maximum full load of 1.0 ampTEID 1.5A ...
450mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
400mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
TEID3.5A Transformer Single Phase Fan Speed Controller
The TEID range of Transformer fan speed controllers manufactured by Flakt Woods. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). TEID 1A EA900000 suitable for a maximum full load of 1.0 ampTEID 1.5A ...
CDA 400 x 1D straight through Silencer
400mm dia x 400mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...
TEID2.2A Transformer Single Phase Fan Speed Controller
The TEID range of Transformer fan speed controllers manufactured by Flakt Woods. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). TEID 1A EA900000 suitable for a maximum full load of 1.0 ampTEID 1.5A ...
CDA 355 x 1D straight through Silencer
355mm dia x 355mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...
CDA 315 x 1D straight through Silencer
315mm dia x 315mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with ...
Flakt Woods ETPR-E‑1 – 400-01 – 0 Fire Damper also known as MFD & ETPR-17
Specified for their superior design and manufacturing excellence, the Flakt Woods CE Certified ETPR-E‑1 fire damper are now available through Northern Fan Supplies from stock With fire safety paramount to residential and commercial building design, contractors and installers rely on the availability of tried and tested CE Certified ETPR ...
355mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
315mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
Espada ILC125 Replaces ILC/2P DC503101
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Diameters 100 mm to 315 mm in stockVolumes Up to 0.48 m³/s (1,730 m³/h)Pressures Up to 700 Pa (Static)Impeller LB Backward BladeCase Style Impact Resistant PlasticC ...
Ropera ILC125 Replaces ILC/2M DC503106
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Features Diameters: 100 – 315 from stockVolume: up to 0.65 m³/sPressure: up to 920 PaImpeller: backward curved centrifugalCase style: spun steelCase coating: p ...
TEID1.5A Transformer Single Phase Fan Speed Controller
The TEID range of Transformer fan speed controllers manufactured by Flakt Woods. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). TEID 1A EA900000 suitable for a maximum full load of 1.0 ampTEID 1.5A ...
Flakt Woods 315mm diameter x 900mm Long Circular Silencer BDER-30 – 031-090
The effective and economic solution for sound attenuation in circular duct systems. 315mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
Flakt Woods ETPR-E‑1 – 315-01 – 0 Fire Damper also known as MFD & ETPR-17
Specified for their superior design and manufacturing excellence, the Flakt Woods CE Certified ETPR-E‑1 fire damper are now available through Northern Fan Supplies from stock With fire safety paramount to residential and commercial building design, contractors and installers rely on the availability of tried and tested CE Certified ETPR ...
Espada ILC100 Replaces ILC/1P DC503100
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial flow fans combined with the benefits of radial fan pressure Diameters 100 mm to 315 mm in stockVolumes Up to 0.48 m³/s (1,730 m³/h)Pressures Up to 700 Pa (Static)Impeller LB Backward BladeCase Style Impact Resistant PlasticC ...
Flakt Woods Ropera ILC100 metal duct fan Replaces ILC/1M DC503105
An easy to install 1ph in-line fan from FlaktWoods. These fans have all the advantages of axial fans combined with the benefits of radial fan pressure Features Diameters: 100 – 315 from stockVolume: up to 0.65 m³/sPressure: up to 920 PaImpeller: backward curved centrifugalCase style: spun steelCase coating: pregal ...
Flakt Woods 250mm diameter x 900mm Long Circular Silencer BDER-30 – 025-090
The effective and economic solution for sound attenuation in circular duct systems. 250mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
TEID1A Transformer Single Phase Fan Speed Controller
The TEID range of Transformer fan speed controllers manufactured by Flakt Woods. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). TEID 1A EA900000 suitable for a maximum full load of 1.0 ampTEID 1.5A ...
Flakt Woods ETPR-E‑1 – 300-01 – 0 Fire Damper also known as MFD & ETPR- 17
Specified for their superior design and manufacturing excellence, the Flakt Woods CE Certified ETPR-E‑1 fire damper are now available through Northern Fan Supplies from stock With fire safety paramount to residential and commercial building design, contractors and installers rely on the availability of tried and tested CE Certified ETPR ...
Flakt Woods 315mm diameter x 600mm Long Circular Silencer BDER-30 – 031-060
The effective and economic solution for sound attenuation in circular duct systems. 315mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
Flakt Woods ETPR-E‑1 – 250-01 – 0 Fire Damper also known as MFD & ETPR-17
Specified for their superior design and manufacturing excellence, the Flakt Woods CE Certified ETPR-E‑1 fire damper are now available through Northern Fan Supplies from stock With fire safety paramount to residential and commercial building design, contractors and installers rely on the availability of tried and tested CE Certified ETPR ...
Flakt Woods 150mm diameter x 900mm Long Circular Silencer BDER-30 – 015-090
The effective and economic solution for sound attenuation in circular duct systems. 150mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
710mm Flexible Connection
710mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
710mm Mounting Feet
Supplied in pairs 710mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
Flakt Woods 250mm diameter x 600mm Long Circular Silencer BDER-30 – 025-060
The effective and economic solution for sound attenuation in circular duct systems. 250mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
710mm dia Flange – suits any manufacturer of fans
710mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix d ...
Woods ME1.3 speed controller
The Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp M ...
ME1.6 Fan Speed Controller by Flakt Woods
The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...
ME1.3 Speed Controller by Flakt Woods
The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...
Flakt Woods 200mm diameter x 900mm Long Circular Silencer BDER-30 – 020-090
The effective and economic solution for sound attenuation in circular duct systems. 200mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
ME1.6 Fan Speed Controller by Woods
The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...
Branded Flakt Woods ME Series Electronic Fan Speed Controllers
Your own brand. Your own contact details. Your own design — On any ME Series Electronic Fan Speed Controller * * Minimum order quantity of 25 Your chance to have your own branded market leading Flakt Woods ME series electronic fan speed controllers. Just imagine your customer has a problem, and whats ...
630mm Flexible Connection
630mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
Flakt Woods ETPR-E‑1 – 200-01 – 0 Fire Damper also known as MFD & ETPR-17
Specified for their superior design and manufacturing excellence, the Flakt Woods CE Certified ETPR-E‑1 fire damper are now available through Northern Fan Supplies from stock With fire safety paramount to residential and commercial building design, contractors and installers rely on the availability of tried and tested CE Certified ETPR ...
Flakt Woods 150mm diameter x 600mm Long Circular Silencer BDER-30 – 015-060
The effective and economic solution for sound attenuation in circular duct systems. 150mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
ME1.1 Speed Controller by Flakt Woods
The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...
560mm Flexible Connection
560mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
Flakt Woods ETPR-E‑1 – 150-01 – 0 Fire Damper also known as MFD & ETPR-17
Specified for their superior design and manufacturing excellence, the Flakt Woods CE Certified ETPR-E‑1 fire damper are now available through Northern Fan Supplies from stock With fire safety paramount to residential and commercial building design, contractors and installers rely on the availability of tried and tested CE Certified ETPR- E‑1 ...
Flakt Woods ETPR-E‑1 – 160-01 – 0 Fire Damper also known as MFD & ETPR-17
Specified for their superior design and manufacturing excellence, the Flakt Woods CE Certified ETPR-E‑1 fire damper are now available through Northern Fan Supplies from stock With fire safety paramount to residential and commercial building design, contractors and installers rely on the availability of tried and tested CE Certified ETPR ...
630mm Mounting Feet
Supplied in pairs 630mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
Flakt Woods ETPR-E‑1 – 125-01 – 0 Fire Damper also known as MFD & ETPR-17
Specified for their superior design and manufacturing excellence, the Flakt Woods CE Certified ETPR-E‑1 fire damper are now available through Northern Fan Supplies from stock With fire safety paramount to residential and commercial building design, contractors and installers rely on the availability of tried and tested CE Certified ETPR- E- ...
Flakt Woods 200mm diameter x 600mm Long Circular Silencer BDER-30 – 020-060
The effective and economic solution for sound attenuation in circular duct systems. 200mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
500mm Flexible Connection
500mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
710mm dia Flange
710mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
630mm dia Flange
630mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
Flakt Woods ETPR-E‑1 – 100-01 – 0 Fire Damper also known as MFD & ETPR-17
Specified for their superior design and manufacturing excellence, the Flakt Woods CE Certified ETPR-E‑1 fire damper are now available through Northern Fan Supplies from stock With fire safety paramount to residential and commercial building design, contractors and installers rely on the availability of tried and tested CE Certified ETPR ...
450mm Flexible Connection
450mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
Flakt Woods 125mm diameter x 900mm Long Circular Silencer BDER-30 – 012-090
The effective and economic solution for sound attenuation in circular duct systems. 125mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
400mm Flexible Connection
400mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
560mm dia Flange
560mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
355mm dia Flexible Connection
355mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
630mm dia Flange – suits any manufacturer of fans
630mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
560mm Mounting Feet
Supplied in pairs 560mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
Flakt Woods 100mm diameter x 900mm Long Circular Silencer BDER-30 – 010-090
The effective and economic solution for sound attenuation in circular duct systems. 100mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
500mm dia Flange
500mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
315mm Flexible Connection
315mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
355mm dia Flange
355mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
450mm dia Flange
450mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
400mm dia Flange
400mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
LCP Without Potentiometer — For use with VLT Drives
LCP Without Potentiometer LCP Without Potentiometer Remote Mounting Kit LCP Copy function Parameter numbers and values visible simultaneously Unit indications (A., V, Hz, RPM, %, s, HP and kW) Rotation direction indication Setup indication – 2 setup Removable during operation up ...
560mm dia Flange – suits any manufacturer of fans
560mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
Flakt Woods 125mm diameter x 600mm Long Circular Silencer BDER-30 – 012-060
The effective and economic solution for sound attenuation in circular duct systems. 125mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
500mm dia Flange – suits any manufacturer of fans
500mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
315mm dia Flange
315mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
500mm Mounting Feet
Supplied in pairs 500mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
450mm dia Flange – suits any manufacturer of fans
450mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
Flakt Woods 100mm diameter x 600mm Long Circular Silencer BDER-30 – 010-060
The effective and economic solution for sound attenuation in circular duct systems. 100mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
400mm dia Flange – suits any manufacturer of fans
400mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
Conversion Kit For VLT Micro Drive 9.6 Amps — M3 Frame
VLT Micro Drive Conversion Kit Conversion kit for VLT Micro Drive.
Conversion Kit For VLT Micro Drive 6.8 Amps — M2 Frame
VLT Micro Drive Conversion Kit Conversion kit for VLT Micro Drive.
355mm dia Flange – suits any manufacturer of fans
mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can al ...
450mm Mounting Feet
Supplied in pairs 450mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
Conversion Kit For VLT Micro Drive 4.2 Amps — M1 Frame
VLT Micro Drive Conversion Kit Conversion kit for VLT Micro Drive.
MFR Foot (150mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (250mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (200mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (150mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFR Foot (200mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFR Foot (250mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (315mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFR Foot (315mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
400mm Mounting Feet
Supplied in pairs 400mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
A.V. Mounts (Anti Vibration Mounts) – load range per mount 5Kg ‑28Kg
Supplied in sets of 4 Anti Vibration Mounts (A.V. Mounts) attach to the bottom of Mounting Feet. A.V. Mounts are used to isolate the fan from the system to prevent vibration transfer through fixings or structures. A.V. Mounts can be used to isolate any products from the main system to prevent vibration transfer The main uses we ...
A.V.Mount (Anti Vibration Mount) – Load range per mount 9Kg — 50Kg
Supplied in sets of 4 Anti Vibration Mounts (A.V. Mounts) attach to the bottom of Mounting Feet. A.V. Mounts are used to isolate the fan from the system to prevent vibration transfer through fixings or structures. A.V. Mounts can be used to isolate any products from the main system to prevent vibration transfer The main uses we ...
355mm Mounting Feet
Supplied in pairs 355mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
315 Mounting Feet
Supplied in pairs 315mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
MFR Foot (100mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFR Foot (125mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (125mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (100mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.