50JM/20/4/6/32/1Ph Long cased axial flow extract fan by Flakt Woods

Flakt Woods

50JM/20/4/6/32/1Ph Long cased axial flow extract fan by Flakt Woods
50JM/20/4/6/32/1Ph Long cased axial flow extract fan by Flakt Woods
50JM/20/4/6/32/1Ph Long cased axial flow extract fan by Flakt Woods
50JM/20/4/6/32/1Ph Long cased axial flow extract fan by Flakt Woods
Overview

This Fan is now Obsolete

it has been replaced with a EJ511466 to make it ERP 2013 compliant (please be aware there may be a performance difference, check if in doubt)

All spare parts are still available to buy; the motor part code is CT514052

The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials.

We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application

The build quality and reliability are the highest we have ever experienced with fans still running since the range was introduced in the early 1990’s

Every time you fit this fan you know you’ve made the right choice, it will enhance your reputation for only using the best quality products

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment (also available for hazardous application on request)
  • Suitable in temperatures from -40°C to 50°C (70°C in some instances, please ask for details)
  • Low to high air volumes
  • Low to high static pressures
  • Available sizes 315mm – 710mm from stock
  • 800mm – 1000mm made to order, ring for availability
  • 1000mm + check for availability
  • The Casings are spun sheet steel, then hot dipped galvanised to give a finish highly resistant to corrosion and can be mounted external and internal
  • The impeller (the bit that goes around and moves the air) is manufactured die cast aluminium
  • The motors are totally enclosed with class F insulation with protection to IP55.
Performance

The curve below shows the fans performance, which is 2,61m3/s at Free Air and peaks at 1.55m3/s at 205Pa, the fan can perform anywhere between these points and the red dot is shown as an example.

Accessories
  • Me1.6 electronic speed controller
  • MT1.5 transformer speed controller
  • 1Ph starter c/w overload
  • Flanges
  • Mounting Feet
  • Flexible Connections
  • Anti vibration mounts
  • Silencers
  • Guards
  • Backdraught dampers
Technical Details

Dimensions

Wiring Diagrams

How loud is it?
  • 62dB(A) at 1.5 metres from the listener
  • 56dB(A) at 3 metres from the listener

Prices & Options
Code & Description Price  
DX511466 : 50JM/20/4/6/32/1Ph Long cased axial flow extract fan by Flakt Woods £524.44 + VAT£629.33
Downloads


Related Products
ME1.6 Fan Speed Controller by Flakt Woods
£48.89

ME1.6 Fan Speed Controller by Flakt Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load....

CDA 500 x 1D straight through Silencer
£225.74

CDA 500 x 1D straight through Silencer

500mm dia x 500mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car,....

500mm dia Flange
£37.40

500mm dia Flange

500mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture .

500mm Mounting Feet
£28.42

500mm Mounting Feet

Supplied in pairs 500mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or....

500mm Flexible Connection
£37.70

500mm Flexible Connection

500mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify....

A.V. Mounts (Anti Vibration Mounts)
£14.44

A.V. Mounts (Anti Vibration Mounts) – load range per mount 5Kg -28Kg

Supplied in sets of 4 Anti Vibration Mounts (A.V. Mounts) attach to the bottom of Mounting Feet. A.V. Mounts are used to isolate the fan from the system to prevent vibration transfer through fixings or structures. A.V. Mounts can be used to isolate any products from the main system to prevent vibration....

Back To Top