VSC35514 short cased axial flow extract fan replaces ZSC350-41

Vent-Axia, Systemair, Ziehl Abegg

VSC35514 short cased axial flow extract fan replaces ZSC350-41
Overview

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular short cased axial on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

Supplied fully assembled
Fully speed controllable
Can be used in any non hazardous environment
Suitable to run in temperatures from -40°C to up to 70°C in some instances
Low to medium air volumes
Low to medium static pressures
Available sizes 315mm – 630mm 1ph from stock
Tough epoxy paint finish
Die cast aluminium impellers (the bit that goes around)
Motor class F insulation with protection to IP54

All fans reversible for supply or extract . If reversed some performance will be lost.

Technical Details

Dimensions

Wiring Diagrams

Prices & Options
Code & Description Price  
vsc35514 : VSC35514 short cased axial flow extract fan replaces ZSC350-41 £232.93 + VAT£279.52


Related Products
CDA 355 x 1D straight through Silencer
£154.95

CDA 355 x 1D straight through Silencer

355mm dia x 355mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car,....

355mm dia Flange
£34.07

355mm dia Flange

355mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture .

355mm Mounting Feet
£15.07

355mm Mounting Feet

Supplied in pairs 355mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or....

355mm dia Flexible Connection
£32.80

355mm dia Flexible Connection

355mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify....

355mm Louvre Shutter
£94.45

355mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The....

1 Phase on /off Starter c/w Overload
£79.00

1 Phase on /off Starter c/w Overload

Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter  offers  push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection....

Back To Top