Products

(514)

1 Phase on /off Starter c/w Overload
£98.89

1 Phase on /​off Starter c/​w Overload

Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter offers push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection which is designed to protect life and u ...

150mm Wall Vent Kit (White) by Vent Axia
£35.23

150mm Wall Vent Kit (White) by Vent Axia

This wall vent kit suit any 150mm wall extractor fan. A perfect way to complete your installation The wall vent kit comes complete with an external wall grille and a telescopic liner. The telescopic liner makes it easy to fit, with no messy cutting required. Telescopic liner suits wall thicknesses from 225mm  ...

15JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB125603
£1,389.96

15JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB125603

Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...

25JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB215607
£1,242.11

25JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB215607

Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finish hig ...

25JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB215608
£1,199.27

25JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB215608

Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finish hig ...

25JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB215609
£1,197.24

25JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB215609

Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...

3 Phase on off Starter c/w Overload
£98.89

3 Phase on off Starter c/​w Overload

Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter offers push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection which is designed to protect life and u ...

30JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB025607
£1,392.60

30JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB025607

Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...

30JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB025608
£1,393.92

30JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB025608

Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...

30JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB025609
£1,389.96

30JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB025609

Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...

315 Mounting Feet
£15.56

315 Mounting Feet

Supplied in pairs 315mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

315mm dia Flange
£19.00

315mm dia Flange – suits any manufacturer of fans

315mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...

315mm dia Flange
£28.00

315mm dia Flange

315mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

315mm Flexible Connection
£32.13

315mm Flexible Connection

315mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

315mm Louvre Shutter
£90.23

315mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

315mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods
£927.06

315mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods

Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...

31JM/16/4/5/34/1Ph Long Cased Axial Flow Fan by Flakt Woods
£617.78

31JM/​16/​4/​5/​34/​1Ph Long Cased Axial Flow Fan by Flakt Woods EJ321460 replaces the obsolete DX321460

The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highest we have ever experienced with fans still running sinc ...

31JMP/16/4/5/32 FlaktWoods Plate Axial was DT315410
£436.10

31JMP/16/4/5/32 FlaktWoods Plate Axial was DT315410

Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/​s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...

355mm dia Flange
£19.66

355mm dia Flange – suits any manufacturer of fans

mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can al ...

355mm dia Flange
£32.00

355mm dia Flange

355mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

355mm dia Flexible Connection
£34.44

355mm dia Flexible Connection

355mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

355mm Louvre Shutter
£97.28

355mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

355mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods
£927.06

355mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods

Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...

355mm Mounting Feet
£16.67

355mm Mounting Feet

Supplied in pairs 355mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

35JMP/16/4/5/24 FlaktWoods Plate Axial was DT355410
£449.45

35JMP/16/4/5/24 FlaktWoods Plate Axial was DT355410

Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/​s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...

400mm dia Flange
£23.27

400mm dia Flange – suits any manufacturer of fans

400mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...

400mm dia Flange
£32.00

400mm dia Flange

400mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

400mm Flexible Connection
£36.75

400mm Flexible Connection

400mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

400mm Louvre Shutter
£111.93

400mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

400mm Maxfan Compac supplied with Inverter speed controller by Flakt Woods
£927.06

400mm Maxfan Compac supplied with Inverter speed controller by Flakt Woods

Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...

400mm Mounting Feet
£17.78

400mm Mounting Feet

Supplied in pairs 400mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

40Jm MaxFan high pressure long cased axial extract fan by Flakt Woods
£1,528.89

40Jm MaxFan high pressure long cased axial extract fan by Flakt Woods

The Flakt Woods JmMax extract fan axial flow fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required  ...

40Jm MaxFan high pressure long cased axial extract fan by Woods
£1,528.89

40Jm MaxFan high pressure long cased axial extract fan by Woods

The Flakt Woods JmMax extract fan axial flow fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required  ...

40JM.BIF (200)/20/2/6/32 3PH - Flakt Woods Bifurcated fan
£1,923.23

40JM.BIF (200)/20/2/6/32 3PH — Flakt Woods Bifurcated fan

Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, the ...

40JM.BIF (200)/20/4/6/32 3PH Flakt Woods Bifurcated fan
£1,804.43

40JM.BIF (200)/20/4/6/32 3PH Flakt Woods Bifurcated fan

Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, the ...

40JM.BIF (200)/20/4/6/32 3PH Woods Bifurcated fan
£1,804.43

40JM.BIF (200)/20/4/6/32 3PH Woods Bifurcated fan

Another great fan from Woods Air Movement, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet st ...

40Jm/16/4/5/40/1PH Long Cased Axial Flow Fan by Flakt Woods
£671.12

40Jm/​16/​4/​5/​40/​1PH Long Cased Axial Flow Fan by Flakt Woods

The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highest we have ever experienced with fans still running sinc ...

40JMP/16/4/5/32 FlaktWoods Plate Axial was DT405410
£454.84

40JMP/16/4/5/32 FlaktWoods Plate Axial was DT405410

Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/​s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...

450mm dia Flange
£25.88

450mm dia Flange – suits any manufacturer of fans

450mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...

450mm dia Flange
£32.00

450mm dia Flange

450mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

450mm Flexible Connection
£37.91

450mm Flexible Connection

450mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

Back To Top

Cookies

We use analytical cookies that need your permission. For more details and advanced options view our Cookies Policy.