Elta Fans SCPP630/4 – 1 Compact Power Plus 2 stage Axial Fan
The Elta Compact SCPP is a 1phase two stage axial fan specifically developed for high pressure requirements not suited to single stage fans. The fans have been constructed from a single sheet of steel, with both motors and axial impellers mounted within the length of the unit casing.
Available in 3 sizes 500÷560÷630 all stocked
The fan can be installed at any angle
Suitable for internal and external use
500dia and 560dia suitable for speed control
Fans are suitable for operating temperatures between ‑20°C and +70°C fixed speed and ‑20°C and +50°C when used with a speed controller.
Adjustable pitch aerofoil impellers are provided with blades made from high quality pressure die cast aluminium
The curve below shows the fans performance, which is 4.29 m³/s at Free Air and peaks at 2.31 m³/s at 500pa, the fan can perform anywhere between these points.
|Code & Description||Price|
|scpp630 : Elta Fans SCPP630/4-1 Compact Power Plus 2 stage Axial Fan||£1,061.24 + VAT £1,273.49|
630mm dia x 630mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...
630mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
Supplied in pairs 630mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
630mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
Supplied in sets of 4 Anti Vibration Mounts (A.V. Mounts) attach to the bottom of Mounting Feet. A.V. Mounts are used to isolate the fan from the system to prevent vibration transfer through fixings or structures. A.V. Mounts can be used to isolate any products from the main system to prevent vibration transfer The main uses we ...