ESP50014 Plate mounted extract fan also known as ZAP500-41

Systemair, Vent-Axia, Ziehl-Abegg,

ESP50014 Plate mounted extract fan also known as ZAP500-41
ESP50014 Plate mounted extract fan also known as ZAP500-41
ESP50014 Plate mounted extract fan also known as ZAP500-41

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment
  • Suitable to run in temperatures from ‑40°C to up to 70°C in some instances
  • Low to medium air volumes
  • Low to medium static pressures
  • Available sizes 315mm – 630mm from stock
  • 710mm – 1000mm check for availability
  • Tough epoxy paint finish
  • Die cast aluminium impellers (the bit that goes around)
  • Motor class F insulation with protection to IP54
  • All fans reversible for supply or extract 

The curve below shows the fans performance, which is 2.1 m³/​s at Free Air and peaks at 1.4 m³/​s at 100Pa, the fan can perform anywhere between these points and the red dot is shown as an example

  • 61dB(A) at 1.5 metres from the listener
  • 55dB(A) at 3 metres from the listener

Prices & Options
Code & Description Price  
esp50014 : ESP50014 Plate mounted extract fan also known as ZAP500-41 £213.33 + VAT £256.00
We accept : Visa, MasterCard, Maestro & PayPal


Related Products
ME1.3 Speed Controller by Flakt Woods
£47.00

ME1.3 Speed Controller by Flakt Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 a ...

CDA 500 x 1D straight through Silencer
£225.74

CDA 5001D straight through Silencer

500mm dia x 500mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with  ...

GV1 - Gas Ventilation Interlock Panel
£427.78

GV1 — Gas Ventilation Interlock Panel

GV1 Ventilation Gas interlock Panel This panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying the gas to the kitchen in the event of a lack of ventilation to extract the fumes; this is usually the re ...

GV 2 Gas Ventilation Interlock Panel
£531.11

GV 2 Gas Ventilation Interlock Panel

GV2 Ventilation Gas interlock Panel This panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying the gas to the kitchen in the event of a lack of ventilation to extract the fumes; this is usually the re ...

NCSP Gas Ventilation Interlock Panel
£176.00

NCSP Gas Ventilation Interlock Panel

NCSP Ventilation Gas interlock Panel This is our cheapest and best selling Ventilation Gas Interlock Panel The panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying t ...

500mm Louvre Shutter
£119.47

500mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

Back To Top