VSP50014 Plate mounted extract fan replaces ZSP500-41

Vent-Axia, Systemair, Ziehl Abegg

VSP50014 Plate mounted extract fan replaces ZSP500-41
Overview

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular plate axials on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

Supplied fully assembled
Fully speed controllable
Can be used in any non hazardous environment
Suitable to run in temperatures from -40°C to up to 70°C in some instances
Low to medium air volumes
Low to medium static pressures
Available sizes 250mm – 630mm 1ph from stock
Tough epoxy paint finish
Die cast aluminium impellers (the bit that goes around)
Motor class F insulation with protection to IP54

All fans reversible for supply or extract . If reversed some performance will be lost.

Performance

The curve below shows the fans performance, which is 2.47m3/s at Free Air and peaks at 1.58m3/s at 125Pa, the fan can perform anywhere between these points and the red dot is shown as an example

Technical Details

Dimensions

Wiring Diagrams

Prices & Options
Code & Description Price  
vsp50014 : VSP50014 Plate mounted extract fan replaces ZSP500-41 £263.29 + VAT£315.95


Related Products
GV1 - Gas Ventilation Interlock Panel
£302.00

GV1 - Gas Ventilation Interlock Panel

GV1 Ventilation Gas interlock Panel This panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying the gas to the kitchen in the event of a lack of ventilation to extract the fumes; this is usually the....

GV 2 Gas Ventilation Interlock Panel
£393.00

GV 2 Gas Ventilation Interlock Panel

GV2 Ventilation Gas interlock Panel This panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying the gas to the kitchen in the event of a lack of ventilation to extract the fumes; this is usually the....

NCSP Gas Ventilation Interlock Panel
£176.00

NCSP Gas Ventilation Interlock Panel

NCSP Ventilation Gas interlock Panel This is our cheapest and best selling Ventilation Gas Interlock Panel The panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying the gas to the kitchen in the....

1 Phase on /off Starter c/w Overload
£79.00

1 Phase on /off Starter c/w Overload

Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter  offers  push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection....

500mm Louvre Shutter
£119.47

500mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The....

Vent Axia 10303106A fan speed controller
£179.80

Vent Axia 10303106A fan speed controller

The Vent-Axia Industrial range of electronic fan speed controllers manufactured by Vent-Axia. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). W10303102M suitable for a maximum full....

Back To Top