Products

(415)

355mm Louvre Shutter
£94.45

355mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

355mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods
£709.41

355mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods

Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...

355mm Mounting Feet
£15.07

355mm Mounting Feet

Supplied in pairs 355mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

35JMP/16/4/5/24 FlaktWoods Plate Axial was DT355410
£241.75

35JMP/16/4/5/24 FlaktWoods Plate Axial was DT355410

Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/​s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...

362320 Vent-Axia Ecotronic Controller Surface Mounting
£127.10

362320 Vent-Axia Ecotronic Controller Surface Mounting

A Single Unit Controller for use with all Traditional T‑Series Ventilating units. With Knockouts for recessed wiring. Where a controller is used with T‑Series, 5‑Core flexible cable is required. Three speeds. Choice of extract/​intake Shutter open, fan Off setting Sensor mode. Enables external electro mechanical switches, eg: Ecotr ...

400mm dia Flange
£34.07

400mm dia Flange

400mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

400mm dia Flange
£17.40

400mm dia Flange – suits any manufacturer of fans

400mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting.  ...

400mm Flexible Connection
£35.00

400mm Flexible Connection

400mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

Back To Top