Note: Code can only be used once per customer. Discount codes are entered after selecting shipping method.
Products
(528)
Same day deliveries locally & nationwide (UK mainland only). Price on request — Send message with your order, or call 0161 864 1777.
Round Plastic Rigid Ducting 100mm diameter
Low cost Round Plastic Rigid Ducting in 100mm dia and available in any length up to 2 metres long. Just choose then length you need and we’ll cut to suit, but don’t worry if you order too much, although rigid this plastic duct is easy to cut. Usually used as a wall or cavity sleeve, but if you need a length of 100mm dia duct, this will fit the bill ...
Round Plastic Rigid Ducting 150mm dia
Low cost Round Plastic Rigid Ducting in 150mm dia and available in any length up to 2 metres long. Just choose then lenght you need and we’ll cut to suit, but don’t worry if you order too much, although rigid this plastic duct is easy to cut. Usually used as a wall or cavity sleeve, but if you need a length of 100mm dia duct, th ...
MFE Foot (100mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (125mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
Emergency Stop Button EM‑1
An Emergency Stop Button is used to cut power supply in the event of an emergency. The button is pushed to break and turned to reset. It is used for applications in many industries including: COMMERCIAL KITCHENS HVACMARINEAVIATIONAMUSEMENTSMININGWORK MACHINERYLABORAT ...
MFR Foot (100mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFR Foot (125mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
315 Mounting Feet
Supplied in pairs 315mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
355mm Mounting Feet
Supplied in pairs 355mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
A.V. Mounts (Anti Vibration Mounts) – load range per mount 5Kg ‑28Kg
Supplied in sets of 4 Anti Vibration Mounts (A.V. Mounts) attach to the bottom of Mounting Feet. A.V. Mounts are used to isolate the fan from the system to prevent vibration transfer through fixings or structures. A.V. Mounts can be used to isolate any products from the main system to prevent vibration transfer The main uses we ...
A.V.Mount (Anti Vibration Mount) – Load range per mount 9Kg — 50Kg
Supplied in sets of 4 Anti Vibration Mounts (A.V. Mounts) attach to the bottom of Mounting Feet. A.V. Mounts are used to isolate the fan from the system to prevent vibration transfer through fixings or structures. A.V. Mounts can be used to isolate any products from the main system to prevent vibration transfer The main uses we ...
400mm Mounting Feet
Supplied in pairs 400mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
MFR Foot (315mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (150mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFR Foot (250mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (200mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (250mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFE Foot (315mm) — to suit Espada fan range
The MFE Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFR Foot (150mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
MFR Foot (200mm) — to suit Ropera fan range
The MFR Foot accessory, is a robust bracket that aids instillation to the floor, wall or ceiling. Sold individually.
Conversion Kit For VLT Micro Drive 4.2 Amps — M1 Frame
VLT Micro Drive Conversion Kit Conversion kit for VLT Micro Drive.
450mm Mounting Feet
Supplied in pairs 450mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
315mm dia Flange – suits any manufacturer of fans
315mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
355mm dia Flange – suits any manufacturer of fans
mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can al ...
FC125 Fast Clamp also known as FK125 and VBM125
The Fast Clamp facilitates quick and easy installation and removal for maintenance of same duct size in-line fans. The clamp is made from galvanised steel and is joined together by two screws. The clamp will also help reduce any fan vibration being transferred to the duct system when correctly fitted. The clamp can also be used to connect other sys ...
FC100 Fast Clamp also known as FK100 and VBM100
The Fast Clamp facilitates quick and easy installation and removal for maintenance of same duct size in-line fans. The clamp is made from galvanised steel and is joined together by two screws. The clamp will also help reduce any fan vibration being transferred to the duct system when correctly fitted. The clamp can also be used to connect other sys ...
FC150 Fast Clamp also known as FK150 and VBM150
The Fast Clamp facilitates quick and easy installation and removal for maintenance of same duct size in-line fans. The clamp is made from galvanised steel and is joined together by two screws. The clamp will also help reduce any fan vibration being transferred to the duct system when correctly fitted. The clamp can also be used to connect other sys ...
Conversion Kit For VLT Micro Drive 6.8 Amps — M2 Frame
VLT Micro Drive Conversion Kit Conversion kit for VLT Micro Drive.
Air Differential Pressure Switch — DPSA-20
Air Differential Pressure Switch. Suitable for applications where airflow proving or filter monitoring is required. The switching set point is adjusted by a knob mounted under the main cover. Pressure Switch comes complete with a duct fixing kit, consisting of PVC Hose and 2 plastic duct adaptors. It has a set of normally open and normally ...
Conversion Kit For VLT Micro Drive 9.6 Amps — M3 Frame
VLT Micro Drive Conversion Kit Conversion kit for VLT Micro Drive.
RT5A Run on Timer for use with extractor fans ventilating Bathrooms, WC’s, Toilets and other small rooms
A multi-range run on timer with time delay adjustment from 5s — 4hrs After the fan is switched On it will keep running until it is switched off, once switched off it will run for the pre set time. Requires a Live, Neutral and a Switched Live Maximum Rating 5 Amps — 230V 1ph 50Hz
400mm dia Flange – suits any manufacturer of fans
400mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
BAS100SLB Bathroom Kitchen wall mounted extractor fan by Vent Axia
Bathroom, Toilet, Kitchen and Cloakroom Extractor fan c/w integral backdraught shutter Vent Axia’s BASICS range. Low cost, but top quality, from what we consider to be the most famous brand name in residential and commercial ventilation equipment in the UK. No matter which range of fans you buy, when they have th ...
FC200 Fast Clamp also known as FK200 and VBM200
The Fast Clamp facilitates quick and easy installation and removal for maintenance of same duct size in-line fans. The clamp is made from galvanised steel and is joined together by two screws. The clamp will also help reduce any fan vibration being transferred to the duct system when correctly fitted. The clamp can also be used to connect other sys ...
Wall Ventilation External Gravity Shutter in White (100mm) by Vent Axia – terminates 100mm dia rigid or flexible ducting
This plastic external gravity shutter is a cost effective solution when you need to terminate a hole in an external or internal wall. This shutter is an ideal fuss free solution, when only the shutter is required or when you need to customize your wall vent kit (usually when a standard wall sleeve isn’t long enou ...
Wall Ventilation External Gravity Shutter in Brown (100mm) by Vent Axia – terminates 100mm dia rigid or flexible ducting
This plastic gravity shutter is a cost effective solution when you need to terminate a hole in an external or internal wall. This shutter an ideal fuss free solution, when only the shutter is required or when you need to customize your wall vent kit (usually when a standard wall sleeve isn’t long enough for the t ...
Flakt Woods 100mm diameter x 600mm Long Circular Silencer BDER-30 – 010-060
The effective and economic solution for sound attenuation in circular duct systems. 100mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
450mm dia Flange – suits any manufacturer of fans
450mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
FC250 Fast Clamp also known as FK250 and VBM250
The Fast Clamp facilitates quick and easy installation and removal for maintenance of same duct size in-line fans. The clamp is made from galvanised steel and is joined together by two screws. The clamp will also help reduce any fan vibration being transferred to the duct system when correctly fitted. The clamp can also be used to connect other sys ...
315mm dia Flange
315mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
500mm Mounting Feet
Supplied in pairs 500mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
500mm dia Flange – suits any manufacturer of fans
500mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
Flakt Woods 125mm diameter x 600mm Long Circular Silencer BDER-30 – 012-060
The effective and economic solution for sound attenuation in circular duct systems. 125mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...
560mm dia Flange – suits any manufacturer of fans
560mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
Minivent SK inline Bathroom Shower Kitchen Toilet extractor fan by Vent Axia
Single speed 100mm in-line axial extract fan. Ducted bath/shower kit, consists of a Minivent IP44 In-Line fan, a ventilation kit consisting of a white ceiling grille and spigot, external louvre for soffit or wall mounting plus 3 meters of flexible duct. The duct should be cut to size, the bend radius should be kept to a maximum to provide the best fan per ...
ECLIPSE 100X Bathroom Kitchen Toilet wall or ceiling mounted extractor fan by Vent Axia – c/w integral backdraught shutter
Bathroom, Toilet, Kitchen and Cloakroom extract fan Vent Axia’s circular ECLIPSE fans part of the BASICS range. Low cost, but top quality, from what we consider to be the most famous brand name in residential and commercial ventilation equipment in the UK. No matter which range of fans you buy, when they have the ...
LCP Without Potentiometer — For use with VLT Drives
LCP Without Potentiometer LCP Without Potentiometer Remote Mounting Kit LCP Copy function Parameter numbers and values visible simultaneously Unit indications (A., V, Hz, RPM, %, s, HP and kW) Rotation direction indication Setup indication – 2 setup Removable during operation up ...
Vent Axia 100mm Extractor Fan Wall Fitting Kit (Brown) 254100
This wall vent kit suit any 100mm wall extractor fan. A perfect way to complete your installation The vent kit comes complete with an external wall grille and a telescopic liner. The telescopic liner makes it easy to fit, with no messy cutting required. Telescopic liner suits wall thicknesses from 225mm up to ...
Vent Axia 100mm Extractor Fan Wall Fitting Kit (White) 254102
This wall vent kit suit any 100mm wall extractor fan. A perfect way to complete your installation The wall vent kit comes complete with an external wall grille and a telescopic liner. The telescopic liner makes it easy to fit, with no messy cutting required. Telescopic liner suits wall thicknesses from 225mm ...
FC315 Fast Clamp also known as FK315 and VBM315
The Fast Clamp facilitates quick and easy installation and removal for maintenance of same duct size in-line fans. The clamp is made from galvanised steel and is joined together by two screws. The clamp will also help reduce any fan vibration being transferred to the duct system when correctly fitted. The clamp can also be used to connect other sys ...